No OneTemporary
Actions

Size

82 KB

Referenced Files

None

Subscribers

None

View Options

	diff --git a/.gitignore b/.gitignore
	index 4238818d5b..db3e8a64e2 100644
	--- a/.gitignore
	+++ b/.gitignore
	@@ -1,20 +1,17 @@
	.DS_Store
	._*
	/docs/
	/src/.phutil_module_cache
	/conf/custom/*
	/webroot/rsrc/custom
	/.divinercache
	.#*
	*#
	*~
	*.swp

	# NetBeans project files
	/nbproject/

	# Arcanist scratch directory
	/.arc
	-
	-# Custom Logo File
	-/webroot/rsrc/image/custom/custom.png
	diff --git a/conf/default.conf.php b/conf/default.conf.php
	index 5af1f689ba..7a1fba7add 100644
	--- a/conf/default.conf.php
	+++ b/conf/default.conf.php
	@@ -1,1259 +1,1250 @@
	<?php

	/*
	* Copyright 2012 Facebook, Inc.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	return array(

	// The root URI which Phabricator is installed on.
	// Example: "http://phabricator.example.com/"
	'phabricator.base-uri' => null,

	// If you have multiple environments, provide the production environment URI
	// here so that emails, etc., generated in development/sandbox environments
	// contain the right links.
	'phabricator.production-uri' => null,

	// Setting this to 'true' will invoke a special setup mode which helps guide
	// you through setting up Phabricator.
	'phabricator.setup' => false,

	// -- IMPORTANT! Security! -------------------------------------------------- //

	// IMPORTANT: By default, Phabricator serves files from the same domain the
	// application lives on. This is convenient but not secure: it creates a large
	// class of vulnerabilities which can not be generally mitigated.
	//
	// To avoid this, you should configure a second domain in the same way you
	// have the primary domain configured (e.g., point it at the same machine and
	// set up the same vhost rules) and provide it here. For instance, if your
	// primary install is on "http://www.phabricator-example.com/", you could
	// configure "http://www.phabricator-files.com/" and specify the entire
	// domain (with protocol) here. This will enforce that files are
	// served only from the alternate domain. Ideally, you should use a
	// completely separate domain name rather than just a different subdomain.
	//
	// It is STRONGLY RECOMMENDED that you configure this. Your install is NOT
	// SECURE unless you do so.
	'security.alternate-file-domain' => null,

	// Default key for HMAC digests where the key is not important (i.e., the
	// hash itself is secret). You can change this if you want (to any other
	// string), but doing so will break existing sessions and CSRF tokens.
	'security.hmac-key' => '[D\t~Y7eNmnQGJ;rnH6aF;m2!vJ8@v8C=Cs:aQS\.Qw',


	-// -- Customization --------------------------------------------------------- //
	-
	- // If you want to use a custom logo (e.g., for your company or organization),
	- // copy 'webroot/rsrc/image/custom/example_template.png' to
	- // 'webroot/rsrc/image/custom/custom.png' and set this to the URI you want it
	- // to link to (like http://www.yourcompany.com/).
	- 'phabricator.custom.logo' => null,
	-
	-
	// -- Internationalization -------------------------------------------------- //

	// This allows customizing texts used in Phabricator. The class must extend
	// PhabricatorTranslation.
	'translation.provider' => 'PhabricatorEnglishTranslation',

	// You can use 'translation.override' if you don't want to create a full
	// translation to give users an option for switching to it and you just want
	// to override some strings in the default translation.
	'translation.override' => array(),


	// -- Access Policies ------------------------------------------------------- //

	// Phabricator allows you to set the visibility of objects (like repositories
	// and source code) to "Public", which means anyone on the internet can see
	// them, even without being logged in. This is great for open source, but
	// some installs may never want to make anything public, so this policy is
	// disabled by default. You can enable it here, which will let you set the
	// policy for objects to "Public". With this option disabled, the most open
	// policy is "All Users", which means users must be logged in to view things.
	'policy.allow-public' => false,


	// -- Logging --------------------------------------------------------------- //

	// To enable the Phabricator access log, specify a path here. The Phabricator
	// access log can provide more detailed information about Phabricator access
	// than normal HTTP access logs (for instance, it can show logged-in users,
	// controllers, and other application data). If not set, no log will be
	// written.
	//
	// Make sure the PHP process can write to the log!
	'log.access.path' => null,

	// Format for the access log. If not set, the default format will be used:
	//
	// "[%D]\t%h\t%u\t%M\t%C\t%m\t%U\t%c\t%T"
	//
	// Available variables are:
	//
	// - %c The HTTP response code.
	// - %C The controller which handled the request.
	// - %D The request date.
	// - %e Epoch timestamp.
	// - %h The webserver's host name.
	// - %p The PID of the server process.
	// - %R The HTTP referrer.
	// - %r The remote IP.
	// - %T The request duration, in microseconds.
	// - %U The request path.
	// - %u The logged-in user, if one is logged in.
	// - %M The HTTP method.
	// - %m For conduit, the Conduit method which was invoked.
	//
	// If a variable isn't available (for example, %m appears in the file format
	// but the request is not a Conduit request), it will be rendered as "-".
	//
	// Note that the default format is subject to change in the future, so if you
	// rely on the log's format, specify it explicitly.
	'log.access.format' => null,


	// -- DarkConsole ----------------------------------------------------------- //

	// DarkConsole is a administrative debugging/profiling tool built into
	// Phabricator. You can leave it disabled unless you're developing against
	// Phabricator.

	// Determines whether or not DarkConsole is available. DarkConsole exposes
	// some data like queries and stack traces, so you should be careful about
	// turning it on in production (although users can not normally see it, even
	// if the deployment configuration enables it).
	'darkconsole.enabled' => false,

	// Always enable DarkConsole, even for logged out users. This potentially
	// exposes sensitive information to users, so make sure untrusted users can
	// not access an install running in this mode. You should definitely leave
	// this off in production. It is only really useful for using DarkConsole
	// utilities to debug or profile logged-out pages. You must set
	// 'darkconsole.enabled' to use this option.
	'darkconsole.always-on' => false,


	// Allows you to mask certain configuration values from appearing in the
	// "Config" tab of DarkConsole.
	'darkconsole.config-mask' => array(
	'mysql.pass',
	'amazon-ses.secret-key',
	'amazon-s3.secret-key',
	'sendgrid.api-key',
	'recaptcha.private-key',
	'phabricator.csrf-key',
	'facebook.application-secret',
	'github.application-secret',
	'google.application-secret',
	'phabricator.application-secret',
	'disqus.application-secret',
	'phabricator.mail-key',
	'security.hmac-key',
	),


	// -- MySQL --------------------------------------------------------------- //

	// Class providing database configuration. It must implement
	// DatabaseConfigurationProvider.
	'mysql.configuration-provider' => 'DefaultDatabaseConfigurationProvider',

	// The username to use when connecting to MySQL.
	'mysql.user' => 'root',

	// The password to use when connecting to MySQL.
	'mysql.pass' => '',

	// The MySQL server to connect to. If you want to connect to a different
	// port than the default (which is 3306), specify it in the hostname
	// (e.g., db.example.com:1234).
	'mysql.host' => 'localhost',

	// The number of times to try reconnecting to the MySQL database
	'mysql.connection-retries' => 3,

	// Phabricator supports PHP extensions MySQL and MySQLi. It is possible to
	// implement also other access mechanism (e.g. PDO_MySQL). The class must
	// extend AphrontMySQLDatabaseConnectionBase.
	'mysql.implementation' => 'AphrontMySQLDatabaseConnection',


	// -- Notifications --------------------------------------------------------- //

	'notification.enabled' => false,

	// Client port for the realtime server to listen on, and for realtime clients
	// to connect to. Use "localhost" if you are running the notification server
	// on the same host as the web server.
	'notification.client-uri' => 'http://localhost:22280/',

	// URI and port for the notification root server.
	'notification.server-uri' => 'http://localhost:22281/',

	// The server must be started as root so it can bind to privileged ports, but
	// if you specify a user here it will drop permissions after binding.
	'notification.user' => null,

	// Location where the server should log to.
	'notification.log' => '/var/log/aphlict.log',

	// PID file to use.
	'notification.pidfile' => '/var/run/aphlict.pid',

	// Enable this option to get additional debug output in the browser.
	'notification.debug' => false,


	// -- Email ----------------------------------------------------------------- //

	// Some Phabricator tools send email notifications, e.g. when Differential
	// revisions are updated or Maniphest tasks are changed. These options allow
	// you to configure how email is delivered.

	// You can test your mail setup by going to "MetaMTA" in the web interface,
	// clicking "Send New Message", and then composing a message.

	// Default address to send mail "From".
	'metamta.default-address' => 'noreply@example.com',

	// Domain used to generate Message-IDs.
	'metamta.domain' => 'example.com',

	// When a message is sent to multiple recipients (for example, several
	// reviewers on a code review), Phabricator can either deliver one email to
	// everyone (e.g., "To: alincoln, usgrant, htaft") or separate emails to each
	// user (e.g., "To: alincoln", "To: usgrant", "To: htaft"). The major
	// advantages and disadvantages of each approach are:
	//
	// - One mail to everyone:
	// - Recipients can see To/Cc at a glance.
	// - If you use mailing lists, you won't get duplicate mail if you're
	// a normal recipient and also Cc'd on a mailing list.
	// - Getting threading to work properly is harder, and probably requires
	// making mail less useful by turning off options.
	// - Sometimes people will "Reply All" and everyone will get two mails,
	// one from the user and one from Phabricator turning their mail into
	// a comment.
	// - Not supported with a private reply-to address.
	// - Mails are sent in the server default translation.
	// - One mail to each user:
	// - Recipients need to look in the mail body to see To/Cc.
	// - If you use mailing lists, recipients may sometimes get duplicate
	// mail.
	// - Getting threading to work properly is easier, and threading settings
	// can be customzied by each user.
	// - "Reply All" no longer spams all other users.
	// - Required if private reply-to addresses are configured.
	// - Mails are sent in the language of user preference.
	//
	// In the code, splitting one outbound email into one-per-recipient is
	// sometimes referred to as "multiplexing".
	'metamta.one-mail-per-recipient' => true,

	// When sending a message that has no To recipient (i.e. all recipients
	// are CC'd, for example when multiplexing mail), set the To field to the
	// following value. If no value is set, messages with no To will have
	// their CCs upgraded to To.
	'metamta.placeholder-to-recipient' => null,

	// When a user takes an action which generates an email notification (like
	// commenting on a Differential revision), Phabricator can either send that
	// mail "From" the user's email address (like "alincoln@logcabin.com") or
	// "From" the 'metamta.default-address' address. The user experience is
	// generally better if Phabricator uses the user's real address as the "From"
	// since the messages are easier to organize when they appear in mail clients,
	// but this will only work if the server is authorized to send email on behalf
	// of the "From" domain. Practically, this means:
	// - If you are doing an install for Example Corp and all the users will
	// have corporate @corp.example.com addresses and any hosts Phabricator
	// is running on are authorized to send email from corp.example.com,
	// you can enable this to make the user experience a little better.
	// - If you are doing an install for an open source project and your
	// users will be registering via Facebook and using personal email
	// addresses, you MUST NOT enable this or virtually all of your outgoing
	// email will vanish into SFP blackholes.
	// - If your install is anything else, you're much safer leaving this
	// off since the risk in turning it on is that your outgoing mail will
	// mostly never arrive.
	'metamta.can-send-as-user' => false,


	// Adapter class to use to transmit mail to the MTA. The default uses
	// PHPMailerLite, which will invoke "sendmail". This is appropriate
	// if sendmail actually works on your host, but if you haven't configured mail
	// it may not be so great. You can also use Amazon SES, by changing this to
	// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
	// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
	'metamta.mail-adapter' =>
	'PhabricatorMailImplementationPHPMailerLiteAdapter',

	// When email is sent, try to hand it off to the MTA immediately instead of
	// queueing it for delivery by the daemons. If you are running the Phabricator
	// daemons with "phd start", you should disable this to provide a (sometimes
	// substantial) performance boost. It's on by default to make setup and
	// configuration a little easier.
	'metamta.send-immediately' => true,

	// If you're using Amazon SES to send email, provide your AWS access key
	// and AWS secret key here. To set up Amazon SES with Phabricator, you need
	// to:
	// - Make sure 'metamta.mail-adapter' is set to:
	// "PhabricatorMailImplementationAmazonSESAdapter"
	// - Make sure 'metamta.can-send-as-user' is false.
	// - Make sure 'metamta.default-address' is configured to something sensible.
	// - Make sure 'metamta.default-address' is a validated SES "From" address.
	'amazon-ses.access-key' => null,
	'amazon-ses.secret-key' => null,

	// If you're using Sendgrid to send email, provide your access credentials
	// here. This will use the REST API. You can also use Sendgrid as a normal
	// SMTP service.
	'sendgrid.api-user' => null,
	'sendgrid.api-key' => null,

	// You can configure a reply handler domain so that email sent from Maniphest
	// will have a special "Reply To" address like "T123+82+af19f@example.com"
	// that allows recipients to reply by email and interact with tasks. For
	// instructions on configurating reply handlers, see the article
	// "Configuring Inbound Email" in the Phabricator documentation. By default,
	// this is set to 'null' and Phabricator will use a generic 'noreply@' address
	// or the address of the acting user instead of a special reply handler
	// address (see 'metamta.default-address'). If you set a domain here,
	// Phabricator will begin generating private reply handler addresses. See
	// also 'metamta.maniphest.reply-handler' to further configure behavior.
	// This key should be set to the domain part after the @, like "example.com".
	'metamta.maniphest.reply-handler-domain' => null,

	// You can follow the instructions in "Configuring Inbound Email" in the
	// Phabricator documentation and set 'metamta.maniphest.reply-handler-domain'
	// to support updating Maniphest tasks by email. If you want more advanced
	// customization than this provides, you can override the reply handler
	// class with an implementation of your own. This will allow you to do things
	// like have a single public reply handler or change how private reply
	// handlers are generated and validated.
	// This key should be set to a loadable subclass of
	// PhabricatorMailReplyHandler (and possibly of ManiphestReplyHandler).
	'metamta.maniphest.reply-handler' => 'ManiphestReplyHandler',

	// If you don't want phabricator to take up an entire domain
	// (or subdomain for that matter), you can use this and set a common
	// prefix for mail sent by phabricator. It will make use of the fact that
	// a mail-address such as phabricator+D123+1hjk213h@example.com will be
	// delivered to the phabricator users mailbox.
	// Set this to the left part of the email address and it well get
	// prepended to all outgoing mail. If you want to use e.g.
	// 'phabricator@example.com' this should be set to 'phabricator'.
	'metamta.single-reply-handler-prefix' => null,

	// Prefix prepended to mail sent by Maniphest. You can change this to
	// distinguish between testing and development installs, for example.
	'metamta.maniphest.subject-prefix' => '[Maniphest]',

	// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
	// but allows email replies via Differential.
	'metamta.differential.reply-handler-domain' => null,

	// See 'metamta.maniphest.reply-handler'. This does the same thing, but
	// affects Differential.
	'metamta.differential.reply-handler' => 'DifferentialReplyHandler',

	// Prefix prepended to mail sent by Differential.
	'metamta.differential.subject-prefix' => '[Differential]',

	// Set this to true if you want patches to be attached to mail from
	// Differential. This won't work if you are using SendGrid as your mail
	// adapter.
	'metamta.differential.attach-patches' => false,

	// To include patches in email bodies, set this to a positive integer. Patches
	// will be inlined if they are at most that many lines. For instance, a value
	// of 100 means "inline patches if they are no longer than 100 lines". By
	// default, patches are not inlined.
	'metamta.differential.inline-patches' => 0,

	// If you enable either of the options above, you can choose what format
	// patches are sent in. Valid options are 'unified' (like diff -u) or 'git'.
	'metamta.differential.patch-format' => 'unified',

	// Prefix prepended to mail sent by Diffusion.
	'metamta.diffusion.subject-prefix' => '[Diffusion]',

	// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
	// but allows email replies via Diffusion.
	'metamta.diffusion.reply-handler-domain' => null,

	// See 'metamta.maniphest.reply-handler'. This does the same thing, but
	// affects Diffusion.
	'metamta.diffusion.reply-handler' => 'PhabricatorAuditReplyHandler',

	// Set this to true if you want patches to be attached to commit notifications
	// from Diffusion. This won't work with SendGrid.
	'metamta.diffusion.attach-patches' => false,

	// To include patches in Diffusion email bodies, set this to a positive
	// integer. Patches will be inlined if they are at most that many lines.
	// By default, patches are not inlined.
	'metamta.diffusion.inline-patches' => 0,

	// If you've enabled attached patches or inline patches for commit emails, you
	// can establish a hard byte limit on their size. You should generally set
	// reasonable byte and time limits (defaults are 1MB and 60 seconds) to avoid
	// sending ridiculously enormous email for changes like "importing an external
	// library" or "accidentally committed this full-length movie as text".
	'metamta.diffusion.byte-limit' => 1024 * 1024,

	// If you've enabled attached patches or inline patches for commit emails, you
	// can establish a hard time limit on generating them.
	'metamta.diffusion.time-limit' => 60,

	// Prefix prepended to mail sent by Package.
	'metamta.package.subject-prefix' => '[Package]',

	// See 'metamta.maniphest.reply-handler'. This does similar thing for package
	// except that it only supports sending out mail and doesn't handle incoming
	// email.
	'metamta.package.reply-handler' => 'OwnersPackageReplyHandler',

	// By default, Phabricator generates unique reply-to addresses and sends a
	// separate email to each recipient when you enable reply handling. This is
	// more secure than using "From" to establish user identity, but can mean
	// users may receive multiple emails when they are on mailing lists. Instead,
	// you can use a single, non-unique reply to address and authenticate users
	// based on the "From" address by setting this to 'true'. This trades away
	// a little bit of security for convenience, but it's reasonable in many
	// installs. Object interactions are still protected using hashes in the
	// single public email address, so objects can not be replied to blindly.
	'metamta.public-replies' => false,

	// You can configure an email address like "bugs@phabricator.example.com"
	// which will automatically create Maniphest tasks when users send email
	// to it. This relies on the "From" address to authenticate users, so it is
	// is not completely secure. To set this up, enter a complete email
	// address like "bugs@phabricator.example.com" and then configure mail to
	// that address so it routed to Phabricator (if you've already configured
	// reply handlers, you're probably already done). See "Configuring Inbound
	// Email" in the documentation for more information.
	'metamta.maniphest.public-create-email' => null,

	// If you enable 'metamta.public-replies', Phabricator uses "From" to
	// authenticate users. You can additionally enable this setting to try to
	// authenticate with 'Reply-To'. Note that this is completely spoofable and
	// insecure (any user can set any 'Reply-To' address) but depending on the
	// nature of your install or other deliverability conditions this might be
	// okay. Generally, you can't do much more by spoofing Reply-To than be
	// annoying (you can write but not read content). But, you know, this is
	// still COMPLETELY INSECURE.
	'metamta.insecure-auth-with-reply-to' => false,

	// If you enable 'metamta.maniphest.public-create-email' and create an
	// email address like "bugs@phabricator.example.com", it will default to
	// rejecting mail which doesn't come from a known user. However, you might
	// want to let anyone send email to this address; to do so, set a default
	// author here (a Phabricator username). A typical use of this might be to
	// create a "System Agent" user called "bugs" and use that name here. If you
	// specify a valid username, mail will always be accepted and used to create
	// a task, even if the sender is not a system user. The original email
	// address will be stored in an 'From Email' field on the task.
	'metamta.maniphest.default-public-author' => null,

	// You can disable the Herald hints in email if users prefer smaller messages.
	// These are the links under the headers "MANAGE HERALD RULES" and
	// "WHY DID I GET THIS EMAIL?". If you set this to true, they will not appear
	// in any mail. Users can still navigate to the links via the web interface.
	'metamta.herald.show-hints' => true,

	// You can disable the hints under "REPLY HANDLER ACTIONS" if users prefer
	// smaller messages. The actions themselves will still work properly.
	'metamta.reply.show-hints' => true,

	// You can disable the "To:" and "Cc:" footers in mail if users prefer
	// smaller messages.
	'metamta.recipients.show-hints' => true,

	// If this option is enabled, Phabricator will add a "Precedence: bulk"
	// header to transactional mail (e.g., Differential, Maniphest and Herald
	// notifications). This may improve the behavior of some auto-responder
	// software and prevent it from replying. However, it may also cause
	// deliverability issues -- notably, you currently can not send this header
	// via Amazon SES, and enabling this option with SES will prevent delivery
	// of any affected mail.
	'metamta.precedence-bulk' => false,

	// Mail.app on OS X Lion won't respect threading headers unless the subject
	// is prefixed with "Re:". If you enable this option, Phabricator will add
	// "Re:" to the subject line of all mail which is expected to thread. If
	// you've set 'metamta.one-mail-per-recipient', users can override this
	// setting in their preferences.
	'metamta.re-prefix' => false,

	// If true, allow MetaMTA to change mail subjects to put text like
	// '[Accepted]' and '[Commented]' in them. This makes subjects more useful,
	// but might break threading on some clients. If you've set
	// 'metamta.one-mail-per-recipient', users can override this setting in their
	// preferences.
	'metamta.vary-subjects' => true,


	// -- Auth ------------------------------------------------------------------ //

	// Can users login with a username/password, or by following the link from
	// a password reset email? You can disable this and configure one or more
	// OAuth providers instead.
	'auth.password-auth-enabled' => true,

	// Maximum number of simultaneous web sessions each user is permitted to have.
	// Setting this to "1" will prevent a user from logging in on more than one
	// browser at the same time.
	'auth.sessions.web' => 5,

	// Maximum number of simultaneous Conduit sessions each user is permitted
	// to have.
	'auth.sessions.conduit' => 5,

	// Set this true to enable the Settings -> SSH Public Keys panel, which will
	// allow users to associated SSH public keys with their accounts. This is only
	// really useful if you're setting up services over SSH and want to use
	// Phabricator for authentication; in most situations you can leave this
	// disabled.
	'auth.sshkeys.enabled' => false,

	// If true, email addresses must be verified (by clicking a link in an
	// email) before a user can login. By default, verification is optional
	// unless 'auth.email-domains' is nonempty (see below).
	'auth.require-email-verification' => false,

	// You can restrict allowed email addresses to certain domains (like
	// "yourcompany.com") by setting a list of allowed domains here. Users will
	// only be allowed to register using email addresses at one of the domains,
	// and will only be able to add new email addresses for these domains. If
	// you configure this, it implies 'auth.require-email-verification'.
	//
	// To configure email domains, set a list of domains like this:
	//
	// array(
	// 'yourcompany.com',
	// 'yourcompany.co.uk',
	// )
	//
	// You should omit the "@" from domains. Note that the domain must match
	// exactly. If you allow "yourcompany.com", that permits "joe@yourcompany.com"
	// but rejects "joe@mail.yourcompany.com".
	'auth.email-domains' => array(),


	// -- Accounts -------------------------------------------------------------- //

	// Is basic account information (email, real name, profile picture) editable?
	// If you set up Phabricator to automatically synchronize account information
	// from some other authoritative system, you can disable this to ensure
	// information remains consistent across both systems.
	'account.editable' => true,

	// When users set or reset a password, it must have at least this many
	// characters.
	'account.minimum-password-length' => 8,


	// -- Facebook OAuth -------------------------------------------------------- //

	// Can users use Facebook credentials to login to Phabricator?
	'facebook.auth-enabled' => false,

	// Can users use Facebook credentials to create new Phabricator accounts?
	'facebook.registration-enabled' => true,

	// Are Facebook accounts permanently linked to Phabricator accounts, or can
	// the user unlink them?
	'facebook.auth-permanent' => false,

	// The Facebook "Application ID" to use for Facebook API access.
	'facebook.application-id' => null,

	// The Facebook "Application Secret" to use for Facebook API access.
	'facebook.application-secret' => null,

	// Should Phabricator reject requests made by users with
	// Secure Browsing disabled?
	'facebook.require-https-auth' => false,

	// -- GitHub OAuth ---------------------------------------------------------- //

	// Can users use GitHub credentials to login to Phabricator?
	'github.auth-enabled' => false,

	// Can users use GitHub credentials to create new Phabricator accounts?
	'github.registration-enabled' => true,

	// Are GitHub accounts permanently linked to Phabricator accounts, or can
	// the user unlink them?
	'github.auth-permanent' => false,

	// The GitHub "Client ID" to use for GitHub API access.
	'github.application-id' => null,

	// The GitHub "Secret" to use for GitHub API access.
	'github.application-secret' => null,


	// -- Google OAuth ---------------------------------------------------------- //

	// Can users use Google credentials to login to Phabricator?
	'google.auth-enabled' => false,

	// Can users use Google credentials to create new Phabricator accounts?
	'google.registration-enabled' => true,

	// Are Google accounts permanently linked to Phabricator accounts, or can
	// the user unlink them?
	'google.auth-permanent' => false,

	// The Google "Client ID" to use for Google API access.
	'google.application-id' => null,

	// The Google "Client Secret" to use for Google API access.
	'google.application-secret' => null,

	// -- LDAP Auth ----------------------------------------------------- //
	// Enable ldap auth
	'ldap.auth-enabled' => false,

	// The LDAP server hostname
	'ldap.hostname' => '',

	// The LDAP base domain name
	'ldap.base_dn' => '',

	// The attribute to be regarded as 'username'. Has to be unique
	'ldap.search_attribute' => '',

	// Perform a search to find a user
	// Many LDAP installations do not have the username in the dn, if this is
	// true for you set this to true and configure the username_attribute below
	'ldap.search-first' => false,

	// The attribute to search for if you have to search for a user
	'ldap.username-attribute' => '',

	// The attribute(s) to be regarded as 'real name'.
	// If more then one attribute is supplied the values of the attributes in
	// the array will be joined
	'ldap.real_name_attributes' => array(),

	// A domain name to use when authenticating against Active Directory
	// (e.g. 'example.com')
	'ldap.activedirectory_domain' => '',

	// The LDAP version
	'ldap.version' => 3,

	// LDAP Referrals Option
	// Whether referrals should be followed by the client
	// Should be set to 0 if you use Windows 2003 AD
	'ldap.referrals' => 1,

	// -- Disqus OAuth ---------------------------------------------------------- //

	// Can users use Disqus credentials to login to Phabricator?
	'disqus.auth-enabled' => false,

	// Can users use Disqus credentials to create new Phabricator accounts?
	'disqus.registration-enabled' => true,

	// Are Disqus accounts permanently linked to Phabricator accounts, or can
	// the user unlink them?
	'disqus.auth-permanent' => false,

	// The Disqus "Client ID" to use for Disqus API access.
	'disqus.application-id' => null,

	// The Disqus "Client Secret" to use for Disqus API access.
	'disqus.application-secret' => null,


	// -- Phabricator OAuth ----------------------------------------------------- //

	// Meta-town -- Phabricator is itself an OAuth Provider
	// TODO -- T887 -- make this support multiple Phabricator instances!

	// The URI of the Phabricator instance to use as an OAuth server.
	'phabricator.oauth-uri' => null,

	// Can users use Phabricator credentials to login to Phabricator?
	'phabricator.auth-enabled' => false,

	// Can users use Phabricator credentials to create new Phabricator accounts?
	'phabricator.registration-enabled' => true,

	// Are Phabricator accounts permanently linked to Phabricator accounts, or can
	// the user unlink them?
	'phabricator.auth-permanent' => false,

	// The Phabricator "Client ID" to use for Phabricator API access.
	'phabricator.application-id' => null,

	// The Phabricator "Client Secret" to use for Phabricator API access.
	'phabricator.application-secret' => null,

	// -- Disqus Comments ------------------------------------------------------- //

	// Should Phame users have Disqus comment widget, and if so what's the
	// website shortname to use? For example, secure.phabricator.org uses
	// "phabricator", which we registered with Disqus. If you aren't familiar
	// with Disqus, see:
	// Disqus quick start guide - http://docs.disqus.com/help/4/
	// Information on shortnames - http://docs.disqus.com/help/68/
	'disqus.shortname' => null,

	// -- Recaptcha ------------------------------------------------------------- //

	// Is Recaptcha enabled? If disabled, captchas will not appear. You should
	// enable Recaptcha if your install is public-facing, as it hinders
	// brute-force attacks.
	'recaptcha.enabled' => false,

	// Your Recaptcha public key, obtained from Recaptcha.
	'recaptcha.public-key' => null,

	// Your Recaptcha private key, obtained from Recaptcha.
	'recaptcha.private-key' => null,


	// -- Misc ------------------------------------------------------------------ //

	// This is hashed with other inputs to generate CSRF tokens. If you want, you
	// can change it to some other string which is unique to your install. This
	// will make your install more secure in a vague, mostly theoretical way. But
	// it will take you like 3 seconds of mashing on your keyboard to set it up so
	// you might as well.
	'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',

	// This is hashed with other inputs to generate mail tokens. If you want, you
	// can change it to some other string which is unique to your install. In
	// particular, you will want to do this if you accidentally send a bunch of
	// mail somewhere you shouldn't have, to invalidate all old reply-to
	// addresses.
	'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',

	// Version string displayed in the footer. You can generate this value from
	// Git log or from the current date in the deploy with a script like this:
	//
	// git log -n1 --pretty=%h > version.txt
	//
	// You can then use this generated value like this:
	//
	// 'phabricator.version' =>
	// file_get_contents(dirname(__FILE__).'/version.txt'),
	'phabricator.version' => 'UNSTABLE',

	// PHP requires that you set a timezone in your php.ini before using date
	// functions, or it will emit a warning. If this isn't possible (for instance,
	// because you are using HPHP) you can set some valid constant for
	// date_default_timezone_set() here and Phabricator will set it on your
	// behalf, silencing the warning.
	'phabricator.timezone' => null,

	// When unhandled exceptions occur, stack traces are hidden by default.
	// You can enable traces for development to make it easier to debug problems.
	'phabricator.show-stack-traces' => false,

	// Shows an error callout if a page generated PHP errors, warnings or notices.
	// This makes it harder to miss problems while developing Phabricator.
	'phabricator.show-error-callout' => false,

	// When users write comments which have URIs, they'll be automatically linked
	// if the protocol appears in this set. This whitelist is primarily to prevent
	// security issues like javascript:// URIs.
	'uri.allowed-protocols' => array(
	'http' => true,
	'https' => true,
	),

	// Tokenizers are UI controls which let the user select other users, email
	// addresses, project names, etc., by typing the first few letters and having
	// the control autocomplete from a list. They can load their data in two ways:
	// either in a big chunk up front, or as the user types. By default, the data
	// is loaded in a big chunk. This is simpler and performs better for small
	// datasets. However, if you have a very large number of users or projects,
	// (in the ballpark of more than a thousand), loading all that data may become
	// slow enough that it's worthwhile to query on demand instead. This makes
	// the typeahead slightly less responsive but overall performance will be much
	// better if you have a ton of stuff. You can figure out which setting is
	// best for your install by changing this setting and then playing with a
	// user tokenizer (like the user selectors in Maniphest or Differential) and
	// seeing which setting loads faster and feels better.
	'tokenizer.ondemand' => false,

	// By default, Phabricator includes some silly nonsense in the UI, such as
	// a submit button called "Clowncopterize" in Differential and a call to
	// "Leap Into Action". If you'd prefer more traditional UI strings like
	// "Submit", you can set this flag to disable most of the jokes and easter
	// eggs.
	'phabricator.serious-business' => false,


	// -- Files ----------------------------------------------------------------- //

	// Lists which uploaded file types may be viewed in the browser. If a file
	// has a mime type which does not appear in this list, it will always be
	// downloaded instead of displayed. This is mainly a usability
	// consideration, since browsers tend to freak out when viewing enormous
	// binary files.
	//
	// The keys in this array are viewable mime types; the values are the mime
	// types they will be delivered as when they are viewed in the browser.
	//
	// IMPORTANT: Configure 'security.alternate-file-domain' above! Your install
	// is NOT safe if it is left unconfigured.
	'files.viewable-mime-types' => array(
	'image/jpeg' => 'image/jpeg',
	'image/jpg' => 'image/jpg',
	'image/png' => 'image/png',
	'image/gif' => 'image/gif',
	'text/plain' => 'text/plain; charset=utf-8',
	'text/x-diff' => 'text/plain; charset=utf-8',

	// ".ico" favicon files, which have mime type diversity. See:
	// http://en.wikipedia.org/wiki/ICO_(file_format)#MIME_type
	'image/x-ico' => 'image/x-icon',
	'image/x-icon' => 'image/x-icon',
	'image/vnd.microsoft.icon' => 'image/x-icon',
	),

	// List of mime types which can be used as the source for an <img /> tag.
	// This should be a subset of 'files.viewable-mime-types' and exclude files
	// like text.
	'files.image-mime-types' => array(
	'image/jpeg' => true,
	'image/jpg' => true,
	'image/png' => true,
	'image/gif' => true,
	'image/x-ico' => true,
	'image/x-icon' => true,
	'image/vnd.microsoft.icon' => true,
	),

	// Phabricator can proxy images from other servers so you can paste the URI
	// to a funny picture of a cat into the comment box and have it show up as an
	// image. However, this means the webserver Phabricator is running on will
	// make HTTP requests to arbitrary URIs. If the server has access to internal
	// resources, this could be a security risk. You should only enable it if you
	// are installed entirely a VPN and VPN access is required to access
	// Phabricator, or if the webserver has no special access to anything. If
	// unsure, it is safer to leave this disabled.
	'files.enable-proxy' => false,


	// -- Storage --------------------------------------------------------------- //

	// Phabricator allows users to upload files, and can keep them in various
	// storage engines. This section allows you to configure which engines
	// Phabricator will use, and how it will use them.

	// The largest filesize Phabricator will store in the MySQL BLOB storage
	// engine, which just uses a database table to store files. While this isn't a
	// best practice, it's really easy to set up. This is hard-limited by the
	// value of 'max_allowed_packet' in MySQL (since this often defaults to 1MB,
	// the default here is slightly smaller than 1MB). Set this to 0 to disable
	// use of the MySQL blob engine.
	'storage.mysql-engine.max-size' => 1000000,

	// Phabricator provides a local disk storage engine, which just writes files
	// to some directory on local disk. The webserver must have read/write
	// permissions on this directory. This is straightforward and suitable for
	// most installs, but will not scale past one web frontend unless the path
	// is actually an NFS mount, since you'll end up with some of the files
	// written to each web frontend and no way for them to share. To use the
	// local disk storage engine, specify the path to a directory here. To
	// disable it, specify null.
	'storage.local-disk.path' => null,

	// If you want to store files in Amazon S3, specify an AWS access and secret
	// key here and a bucket name below.
	'amazon-s3.access-key' => null,
	'amazon-s3.secret-key' => null,

	// Set this to a valid Amazon S3 bucket to store files there. You must also
	// configure S3 access keys above.
	'storage.s3.bucket' => null,

	// Phabricator uses a storage engine selector to choose which storage engine
	// to use when writing file data. If you add new storage engines or want to
	// provide very custom rules (e.g., write images to one storage engine and
	// other files to a different one), you can provide an alternate
	// implementation here. The default engine will use choose MySQL, Local Disk,
	// and S3, in that order, if they have valid configurations above and a file
	// fits within configured limits.
	'storage.engine-selector' => 'PhabricatorDefaultFileStorageEngineSelector',

	// Set the size of the largest file a user may upload. This is used to render
	// text like "Maximum file size: 10MB" on interfaces where users can upload
	// files, and files larger than this size will be rejected.
	//
	// Specify this limit in bytes, or using a "K", "M", or "G" suffix.
	//
	// NOTE: Setting this to a large size is NOT sufficient to allow users to
	// upload large files. You must also configure a number of other settings. To
	// configure file upload limits, consult the article "Configuring File Upload
	// Limits" in the documentation. Once you've configured some limit across all
	// levels of the server, you can set this limit to an appropriate value and
	// the UI will then reflect the actual configured limit.
	'storage.upload-size-limit' => null,

	// Phabricator puts databases in a namespace, which defualts to "phabricator"
	// -- for instance, the Differential database is named
	// "phabricator_differential" by default. You can change this namespace if you
	// want. Normally, you should not do this unless you are developing
	// Phabricator and using namespaces to separate multiple sandbox datasets.
	'storage.default-namespace' => 'phabricator',


	// -- Search ---------------------------------------------------------------- //

	// Phabricator supports Elastic Search; to use it, specify a host like
	// 'http://elastic.example.com:9200/' here.
	'search.elastic.host' => null,

	// Phabricator uses a search engine selector to choose which search engine
	// to use when indexing and reconstructing documents, and when executing
	// queries. You can override the engine selector to provide a new selector
	// class which can select some custom engine you implement, if you want to
	// store your documents in some search engine which does not have default
	// support.
	'search.engine-selector' => 'PhabricatorDefaultSearchEngineSelector',


	// -- Differential ---------------------------------------------------------- //

	'differential.revision-custom-detail-renderer' => null,

	// Array for custom remarkup rules. The array should have a list of
	// class names of classes that extend PhutilRemarkupRule
	'differential.custom-remarkup-rules' => null,

	// Array for custom remarkup block rules. The array should have a list of
	// class names of classes that extend PhutilRemarkupEngineBlockRule
	'differential.custom-remarkup-block-rules' => null,

	// Set display word-wrap widths for Differential. Specify a dictionary of
	// regular expressions mapping to column widths. The filename will be matched
	// against each regexp in order until one matches. The default configuration
	// uses a width of 100 for Java and 80 for other languages. Note that 80 is
	// the greatest column width of all time. Changes here will not be immediately
	// reflected in old revisions unless you purge the changeset render cache
	// (with `./scripts/util/purge_cache.php --changesets`).
	'differential.wordwrap' => array(
	'/\.java$/' => 100,
	'/.*/' => 80,
	),

	// List of file regexps where whitespace is meaningful and should not
	// use 'ignore-all' by default
	'differential.whitespace-matters' => array(
	'/\.py$/',
	'/\.l?hs$/',
	),

	'differential.field-selector' => 'DifferentialDefaultFieldSelector',

	// Differential can show "Host" and "Path" fields on revisions, with
	// information about the machine and working directory where the
	// change came from. These fields are disabled by default because they may
	// occasionally have sensitive information; you can set this to true to
	// enable them.
	'differential.show-host-field' => false,

	// Differential has a required "Test Plan" field by default, which requires
	// authors to fill out information about how they verified the correctness of
	// their changes when sending code for review. If you'd prefer not to use
	// this field, you can disable it here. You can also make it optional
	// (instead of required) below.
	'differential.show-test-plan-field' => true,

	// Differential has a required "Test Plan" field by default. You can make it
	// optional by setting this to false. You can also completely remove it above,
	// if you prefer.
	'differential.require-test-plan-field' => true,

	// If you set this to true, users can "!accept" revisions via email (normally,
	// they can take other actions but can not "!accept"). This action is disabled
	// by default because email authentication can be configured to be very weak,
	// and, socially, email "!accept" is kind of sketchy and implies revisions may
	// not actually be receiving thorough review.
	'differential.enable-email-accept' => false,

	// If you set this to true, users won't need to login to view differential
	// revisions. Anonymous users will have read-only access and won't be able to
	// interact with the revisions.
	'differential.anonymous-access' => false,

	// List of file regexps that should be treated as if they are generated by
	// an automatic process, and thus get hidden by default in differential.
	'differential.generated-paths' => array(
	// '/config\.h$/',
	// '#/autobuilt/#',
	),

	// If you set this to true, users can accept their own revisions. This action
	// is disabled by default because it's most likely not a behavior you want,
	// but it proves useful if you are working alone on a project and want to make
	// use of all of differential's features.
	'differential.allow-self-accept' => false,

	// -- Maniphest ------------------------------------------------------------- //

	'maniphest.enabled' => true,

	// Array of custom fields for Maniphest tasks. For details on adding custom
	// fields to Maniphest, see "Maniphest User Guide: Adding Custom Fields".
	'maniphest.custom-fields' => array(),

	// Class which drives custom field construction. See "Maniphest User Guide:
	// Adding Custom Fields" in the documentation for more information.
	'maniphest.custom-task-extensions-class' => 'ManiphestDefaultTaskExtensions',

	// -- Phriction ------------------------------------------------------------- //

	'phriction.enabled' => true,

	// -- Remarkup -------------------------------------------------------------- //

	// If you enable this, linked YouTube videos will be embeded inline. This has
	// mild security implications (you'll leak referrers to YouTube) and is pretty
	// silly (but sort of awesome).
	'remarkup.enable-embedded-youtube' => false,


	// -- Garbage Collection ---------------------------------------------------- //

	// Phabricator generates various logs and caches in the database which can
	// be garbage collected after a while to make the total data size more
	// manageable. To run garbage collection, launch a
	// PhabricatorGarbageCollector daemon.

	// Since the GC daemon can issue large writes and table scans, you may want to
	// run it only during off hours or make sure it is scheduled so it doesn't
	// overlap with backups. This determines when the daemon can start running
	// each day.
	'gcdaemon.run-at' => '12 AM',

	// How many seconds after 'gcdaemon.run-at' the daemon may collect garbage
	// for. By default it runs continuously, but you can set it to run for a
	// limited period of time. For instance, if you do backups at 3 AM, you might
	// run garbage collection for an hour beforehand. This is not a high-precision
	// limit so you may want to leave some room for the GC to actually stop, and
	// if you set it to something like 3 seconds you're on your own.
	'gcdaemon.run-for' => 24 * 60 * 60,

	// These 'ttl' keys configure how much old data the GC daemon keeps around.
	// Objects older than the ttl will be collected. Set any value to 0 to store
	// data indefinitely.

	'gcdaemon.ttl.herald-transcripts' => 30 * (24 * 60 * 60),
	'gcdaemon.ttl.daemon-logs' => 7 * (24 * 60 * 60),
	'gcdaemon.ttl.differential-parse-cache' => 14 * (24 * 60 * 60),
	'gcdaemon.ttl.markup-cache' => 30 * (24 * 60 * 60),


	// -- Feed ------------------------------------------------------------------ //

	// If you set this to true, you can embed Phabricator activity feeds in other
	// pages using iframes. These feeds are completely public, and a login is not
	// required to view them! This is intended for things like open source
	// projects that want to expose an activity feed on the project homepage.
	//
	// NOTE: You must also set `policy.allow-public` to true for this setting
	// to work properly.
	'feed.public' => false,


	// -- Drydock --------------------------------------------------------------- //

	// If you want to use Drydock's builtin EC2 Blueprints, configure your AWS
	// EC2 credentials here.
	'amazon-ec2.access-key' => null,
	'amazon-ec2.secret-key' => null,


	// -- Customization --------------------------------------------------------- //

	// Paths to additional phutil libraries to load.
	'load-libraries' => array(),

	'aphront.default-application-configuration-class' =>
	'AphrontDefaultApplicationConfiguration',

	'controller.oauth-registration' =>
	'PhabricatorOAuthDefaultRegistrationController',


	// Directory that phd (the Phabricator daemon control script) should use to
	// track running daemons.
	'phd.pid-directory' => '/var/tmp/phd',

	// Number of "TaskMaster" daemons that "phd start" should start. You can
	// raise this if you have a task backlog, or explicitly launch more with
	// "phd launch <N> taskmaster".
	'phd.start-taskmasters' => 4,

	// Launch daemons in "verbose" mode by default. This creates a lot of output,
	// but can help debug issues. Daemons launched in debug mode with "phd debug"
	// are always launched in verbose mode. See also 'phd.trace'.
	'phd.verbose' => false,

	// Launch daemons in "trace" mode by default. This creates an ENORMOUS amount
	// of output, but can help debug issues. Daemons launched in debug mode with
	// "phd debug" are always launched in trace mdoe. See also 'phd.verbose'.
	'phd.trace' => false,

	// Path to custom celerity resource map relative to 'phabricator/src'.
	// See also `scripts/celerity_mapper.php`.
	'celerity.resource-path' => '__celerity_resource_map__.php',

	// This value is an input to the hash function when building resource hashes.
	// It has no security value, but if you accidentally poison user caches (by
	// pushing a bad patch or having something go wrong with a CDN, e.g.) you can
	// change this to something else and rebuild the Celerity map to break user
	// caches. Unless you are doing Celerity development, it is exceptionally
	// unlikely that you need to modify this.
	'celerity.resource-hash' => 'd9455ea150622ee044f7931dabfa52aa',

	// In a development environment, it is desirable to force static resources
	// (CSS and JS) to be read from disk on every request, so that edits to them
	// appear when you reload the page even if you haven't updated the resource
	// maps. This setting ensures requests will be verified against the state on
	// disk. Generally, you should leave this off in production (caching behavior
	// and performance improve with it off) but turn it on in development. (These
	// settings are the defaults.)
	'celerity.force-disk-reads' => false,

	// Minify static resources by removing whitespace and comments. You should
	// enable this in production, but disable it in development.
	'celerity.minify' => false,

	// You can respond to various application events by installing listeners,
	// which will receive callbacks when interesting things occur. Specify a list
	// of classes which extend PhabricatorEventListener here.
	'events.listeners' => array(),

	// -- Syntax Highlighting --------------------------------------------------- //

	// Phabricator can highlight PHP by default and use Pygments for other
	// languages if enabled. You can provide a custom highlighter engine by
	// extending class PhutilSyntaxHighlighterEngine.
	'syntax-highlighter.engine' => 'PhutilDefaultSyntaxHighlighterEngine',

	// If you want syntax highlighting for other languages than PHP then you can
	// install the python package 'Pygments', make sure the 'pygmentize' script is
	// available in the $PATH of the webserver, and then enable this.
	'pygments.enabled' => false,

	// In places that we display a dropdown to syntax-highlight code,
	// this is where that list is defined.
	// Syntax is 'lexer-name' => 'Display Name',
	'pygments.dropdown-choices' => array(
	'apacheconf' => 'Apache Configuration',
	'bash' => 'Bash Scripting',
	'brainfuck' => 'Brainf*ck',
	'c' => 'C',
	'cpp' => 'C++',
	'css' => 'CSS',
	'diff' => 'Diff',
	'django' => 'Django Templating',
	'erb' => 'Embedded Ruby/ERB',
	'erlang' => 'Erlang',
	'html' => 'HTML',
	'infer' => 'Infer from title (extension)',
	'java' => 'Java',
	'js' => 'Javascript',
	'mysql' => 'MySQL',
	'perl' => 'Perl',
	'php' => 'PHP',
	'text' => 'Plain Text',
	'python' => 'Python',
	'rainbow' => 'Rainbow',
	'remarkup' => 'Remarkup',
	'ruby' => 'Ruby',
	'xml' => 'XML',
	),

	'pygments.dropdown-default' => 'infer',

	// This is an override list of regular expressions which allows you to choose
	// what language files are highlighted as. If your projects have certain rules
	// about filenames or use unusual or ambiguous language extensions, you can
	// create a mapping here. This is an ordered dictionary of regular expressions
	// which will be tested against the filename. They should map to either an
	// explicit language as a string value, or a numeric index into the captured
	// groups as an integer.
	'syntax.filemap' => array(
	// Example: Treat all '*.xyz' files as PHP.
	// '@\\.xyz$@' => 'php',

	// Example: Treat 'httpd.conf' as 'apacheconf'.
	// '@/httpd\\.conf$@' => 'apacheconf',

	// Example: Treat all '*.x.bak' file as '.x'. NOTE: we map to capturing
	// group 1 by specifying the mapping as "1".
	// '@\\.([^.]+)\\.bak$@' => 1,

	'@\.arcconfig$@' => 'js',
	'@\.divinerconfig$@' => 'js',
	),

	// Set the default monospaced font style for users who haven't set a custom
	// style.
	'style.monospace' => '10px "Menlo", "Consolas", "Monaco", monospace',


	// -- Debugging ------------------------------------------------------------- //

	// Enable this to change HTTP redirects into normal pages with a link to the
	// redirection target. For example, after you submit a form you'll get a page
	// saying "normally, you'd be redirected...". This is useful to examine
	// service or profiler information on write pathways, or debug redirects. It
	// also makes the UX horrible for normal use, so you should enable it only
	// when debugging.
	//
	// NOTE: This does not currently work for forms with Javascript "workflow",
	// since the redirect happens in Javascript.
	'debug.stop-on-redirect' => false,

	// Enable this to always profile every page. This is very slow! You should
	// only enable it when debugging.
	'debug.profile-every-request' => false,


	// -- Previews ------------------------------------------------------------- //

	// Turn on to enable the "viewport" meta tag. This is a preview feature which
	// will improve the usability of Phabricator on phones and tablets once it
	// is ready.
	'preview.viewport-meta-tag' => false,

	// -- Environment ---------------------------------------------------------- //

	// Phabricator occasionally shells out to other binaries on the server.
	// An example of this is the "pygmentize" command, used to syntax-highlight
	// code written in languages other than PHP. By default, it is assumed that
	// these binaries are in the $PATH of the user running Phabricator (normally
	// 'apache', 'httpd', or 'nobody'). Here you can add extra directories to
	// the $PATH environment variable, for when these binaries are in non-standard
	// locations.
	'environment.append-paths' => array(),
	);
	diff --git a/src/view/page/PhabricatorStandardPageView.php b/src/view/page/PhabricatorStandardPageView.php
	index cb4a88ac30..42c61787b2 100644
	--- a/src/view/page/PhabricatorStandardPageView.php
	+++ b/src/view/page/PhabricatorStandardPageView.php
	@@ -1,585 +1,570 @@
	<?php

	/*
	* Copyright 2012 Facebook, Inc.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	final class PhabricatorStandardPageView extends AphrontPageView {

	private $baseURI;
	private $applicationName;
	private $tabs = array();
	private $selectedTab;
	private $glyph;
	private $bodyContent;
	private $request;
	private $isAdminInterface;
	private $showChrome = true;
	private $isFrameable = false;
	private $disableConsole;
	private $searchDefaultScope;
	private $pageObjects = array();

	public function setIsAdminInterface($is_admin_interface) {
	$this->isAdminInterface = $is_admin_interface;
	return $this;
	}

	public function setIsLoggedOut($is_logged_out) {
	if ($is_logged_out) {
	$this->tabs = array_merge($this->tabs, array(
	'login' => array(
	'name' => 'Login',
	'href' => '/login/'
	)
	));
	}
	return $this;
	}

	public function getIsAdminInterface() {
	return $this->isAdminInterface;
	}

	public function setRequest($request) {
	$this->request = $request;
	return $this;
	}

	public function getRequest() {
	return $this->request;
	}

	public function setApplicationName($application_name) {
	$this->applicationName = $application_name;
	return $this;
	}

	public function setFrameable($frameable) {
	$this->isFrameable = $frameable;
	return $this;
	}

	public function setDisableConsole($disable) {
	$this->disableConsole = $disable;
	return $this;
	}

	public function getApplicationName() {
	return $this->applicationName;
	}

	public function setBaseURI($base_uri) {
	$this->baseURI = $base_uri;
	return $this;
	}

	public function getBaseURI() {
	return $this->baseURI;
	}

	public function setTabs(array $tabs, $selected_tab) {
	$this->tabs = $tabs;
	$this->selectedTab = $selected_tab;
	return $this;
	}

	public function setShowChrome($show_chrome) {
	$this->showChrome = $show_chrome;
	return $this;
	}

	public function getShowChrome() {
	return $this->showChrome;
	}

	public function setSearchDefaultScope($search_default_scope) {
	$this->searchDefaultScope = $search_default_scope;
	return $this;
	}

	public function getSearchDefaultScope() {
	return $this->searchDefaultScope;
	}

	public function appendPageObjects(array $objs) {
	foreach ($objs as $obj) {
	$this->pageObjects[] = $obj;
	}
	}

	public function getTitle() {
	$use_glyph = true;
	$request = $this->getRequest();
	if ($request) {
	$user = $request->getUser();
	if ($user && $user->loadPreferences()->getPreference(
	PhabricatorUserPreferences::PREFERENCE_TITLES) !== 'glyph') {
	$use_glyph = false;
	}
	}

	return ($use_glyph ?
	$this->getGlyph() : '['.$this->getApplicationName().']').
	' '.parent::getTitle();
	}


	protected function willRenderPage() {

	if (!$this->getRequest()) {
	throw new Exception(
	"You must set the Request to render a PhabricatorStandardPageView.");
	}

	$console = $this->getConsole();

	require_celerity_resource('phabricator-core-css');
	require_celerity_resource('phabricator-core-buttons-css');
	require_celerity_resource('phabricator-standard-page-view');
	if (PhabricatorEnv::getEnvConfig('notification.enabled')) {
	require_celerity_resource('phabricator-notification-css');
	}

	$current_token = null;
	$request = $this->getRequest();
	if ($request) {
	$user = $request->getUser();
	if ($user) {
	$current_token = $user->getCSRFToken();
	}
	}

	Javelin::initBehavior('workflow', array());
	Javelin::initBehavior(
	'refresh-csrf',
	array(
	'tokenName' => AphrontRequest::getCSRFTokenName(),
	'header' => AphrontRequest::getCSRFHeaderName(),
	'current' => $current_token,
	));

	$pref_shortcut = PhabricatorUserPreferences::PREFERENCE_SEARCH_SHORTCUT;
	if ($user) {
	$shortcut = $user->loadPreferences()->getPreference($pref_shortcut, 1);
	} else {
	$shortcut = 1;
	}
	Javelin::initBehavior(
	'phabricator-keyboard-shortcuts',
	array(
	'helpURI' => '/help/keyboardshortcut/',
	'search_shortcut' => $shortcut,
	));

	if ($console) {
	require_celerity_resource('aphront-dark-console-css');
	Javelin::initBehavior(
	'dark-console',
	array(
	'uri' => '/~/',
	'request_uri' => $request ? (string) $request->getRequestURI() : '/',
	));

	// Change this to initBehavior when there is some behavior to initialize
	require_celerity_resource('javelin-behavior-error-log');
	}

	$this->bodyContent = $this->renderChildren();
	}


	protected function getHead() {

	$framebust = null;
	if (!$this->isFrameable) {
	$framebust = '(top != self) && top.location.replace(self.location.href);';
	}

	$response = CelerityAPI::getStaticResourceResponse();

	$monospaced = PhabricatorEnv::getEnvConfig('style.monospace');

	$request = $this->getRequest();
	if ($request) {
	$user = $request->getUser();
	if ($user) {
	$monospaced = nonempty(
	$user->loadPreferences()->getPreference(
	PhabricatorUserPreferences::PREFERENCE_MONOSPACED),
	$monospaced);
	}
	}

	$viewport_tag = null;
	if (PhabricatorEnv::getEnvConfig('preview.viewport-meta-tag')) {
	$viewport_tag = phutil_render_tag(
	'meta',
	array(
	'name' => 'viewport',
	'content' => 'width=device-width, initial-scale=1, maximum-scale=1',
	));
	}

	$head =
	$viewport_tag.
	'<script type="text/javascript">'.
	$framebust.
	'window.__DEV__=1;'.
	'</script>'.
	$response->renderResourcesOfType('css').
	'<style type="text/css">'.
	'.PhabricatorMonospaced { font: '.$monospaced.'; }'.
	'</style>'.
	$response->renderSingleResource('javelin-magical-init');

	return $head;
	}

	public function setGlyph($glyph) {
	$this->glyph = $glyph;
	return $this;
	}

	public function getGlyph() {
	return $this->glyph;
	}

	protected function willSendResponse($response) {
	$console = $this->getRequest()->getApplicationConfiguration()->getConsole();
	if ($console) {
	$response = str_replace(
	'<darkconsole />',
	$console->render($this->getRequest()),
	$response);
	}
	return $response;
	}

	protected function getBody() {
	$console = $this->getConsole();

	$tabs = array();
	foreach ($this->tabs as $name => $tab) {
	$tab_markup = phutil_render_tag(
	'a',
	array(
	'href' => idx($tab, 'href'),
	),
	phutil_escape_html(idx($tab, 'name')));
	$tab_markup = phutil_render_tag(
	'td',
	array(
	'class' => ($name == $this->selectedTab)
	? 'phabricator-selected-tab'
	: null,
	),
	$tab_markup);
	$tabs[] = $tab_markup;
	}
	$tabs = implode('', $tabs);

	$login_stuff = null;
	$request = $this->getRequest();
	$user = null;
	if ($request) {
	$user = $request->getUser();
	// NOTE: user may not be set here if we caught an exception early
	// in the execution workflow.
	if ($user && $user->getPHID()) {
	$login_stuff =
	phutil_render_tag(
	'a',
	array(
	'href' => '/p/'.$user->getUsername().'/',
	),
	phutil_escape_html($user->getUsername())).
	' · '.
	'<a href="/settings/">Settings</a>'.
	' · '.
	phabricator_render_form(
	$user,
	array(
	'action' => '/search/',
	'method' => 'post',
	'style' => 'display: inline',
	),
	'<input type="text" name="query" id="standard-search-box" />'.
	' in '.
	AphrontFormSelectControl::renderSelectTag(
	$this->getSearchDefaultScope(),
	PhabricatorSearchScope::getScopeOptions(),
	array(
	'name' => 'scope',
	)).
	' '.
	'<button>Search</button>');
	}
	}

	$foot_links = array();

	$version = PhabricatorEnv::getEnvConfig('phabricator.version');
	$foot_links[] = phutil_escape_html('Phabricator '.$version);

	$foot_links[] =
	'<a href="https://secure.phabricator.com/maniphest/task/create/">'.
	'Report a Bug'.
	'</a>';

	if (PhabricatorEnv::getEnvConfig('darkconsole.enabled') &&
	!PhabricatorEnv::getEnvConfig('darkconsole.always-on')) {
	if ($console) {
	$link = javelin_render_tag(
	'a',
	array(
	'href' => '/~/',
	'sigil' => 'workflow',
	),
	'Disable DarkConsole');
	} else {
	$link = javelin_render_tag(
	'a',
	array(
	'href' => '/~/',
	'sigil' => 'workflow',
	),
	'Enable DarkConsole');
	}
	$foot_links[] = $link;
	}

	if ($user && $user->getPHID()) {
	// This ends up very early in tab order at the top of the page and there's
	// a bunch of junk up there anyway, just shove it down here.
	$foot_links[] = phabricator_render_form(
	$user,
	array(
	'action' => '/logout/',
	'method' => 'post',
	'style' => 'display: inline',
	),
	'<button class="link">Logout</button>');
	}

	$foot_links = implode(' · ', $foot_links);

	$admin_class = null;
	if ($this->getIsAdminInterface()) {
	$admin_class = 'phabricator-admin-page-view';
	}

	- $custom_logo = null;
	- $with_custom = null;
	- $custom_conf = PhabricatorEnv::getEnvConfig('phabricator.custom.logo');
	- if ($custom_conf) {
	- $with_custom = 'phabricator-logo-with-custom';
	- $custom_logo = phutil_render_tag(
	- 'a',
	- array(
	- 'class' => 'logo-custom',
	- 'href' => $custom_conf,
	- ),
	- ' ');
	- }
	-
	$notification_indicator = '';
	$notification_dropdown = '';
	$notification_container = '';

	if (PhabricatorEnv::getEnvConfig('notification.enabled') &&
	$user &&
	$user->isLoggedIn()) {

	$aphlict_object_id = 'aphlictswfobject';

	$client_uri = PhabricatorEnv::getEnvConfig('notification.client-uri');
	$client_uri = new PhutilURI($client_uri);
	if ($client_uri->getDomain() == 'localhost') {
	$this_host = $this->getRequest()->getHost();
	$this_host = new PhutilURI('http://'.$this_host.'/');
	$client_uri->setDomain($this_host->getDomain());
	}

	$enable_debug = PhabricatorEnv::getEnvConfig('notification.debug');

	Javelin::initBehavior(
	'aphlict-listen',
	array(
	'id' => $aphlict_object_id,
	'server' => $client_uri->getDomain(),
	'port' => $client_uri->getPort(),
	'debug' => $enable_debug,
	'pageObjects' => array_fill_keys($this->pageObjects, true),
	));

	Javelin::initBehavior('aphlict-dropdown', array());

	$notification_count = id(new PhabricatorFeedStoryNotification())
	->countUnread($user);

	$indicator_classes = array(
	'phabricator-notification-indicator',
	);
	if ($notification_count) {
	$indicator_classes[] = 'phabricator-notification-indicator-unread';
	}

	$notification_indicator = javelin_render_tag(
	'div',
	array(
	'id' => 'phabricator-notification-indicator',
	'class' => implode(' ', $indicator_classes),
	),
	$notification_count);

	$notification_indicator = javelin_render_tag(
	'div',
	array(
	'id' => 'phabricator-notification-menu',
	'class' => 'phabricator-icon-menu icon-menu-notifications',
	'sigil' => 'aphlict-indicator',
	),
	$notification_indicator);

	$notification_indicator = javelin_render_tag(
	'td',
	array(
	'class' => 'phabricator-icon-menu-cell',
	),
	$notification_indicator);

	$notification_container =
	'<div id="aphlictswf-container" style="height:0px; width:0px;">'.
	'</div>';
	$notification_dropdown =
	javelin_render_tag(
	'div',
	array(
	'sigil' => 'aphlict-dropdown',
	'id' => 'phabricator-notification-dropdown',
	'style' => 'display: none',
	),
	'');
	}

	$header_chrome = null;
	$footer_chrome = null;
	if ($this->getShowChrome()) {
	$header_chrome =
	'<table class="phabricator-standard-header">'.
	'<tr>'.
	- '<td class="phabricator-logo '.$with_custom.'">'.
	- $custom_logo.
	+ '<td class="phabricator-logo">'.
	'<a class="logo-standard" href="/"> </a>'.
	'</td>'.
	$notification_indicator.
	'<td>'.
	'<table class="phabricator-primary-navigation">'.
	'<tr>'.
	'<th>'.
	phutil_render_tag(
	'a',
	array(
	'href' => $this->getBaseURI(),
	'class' => 'phabricator-head-appname',
	),
	phutil_escape_html($this->getApplicationName())).
	'</th>'.
	$tabs.
	'</tr>'.
	'</table>'.
	'</td>'.
	'<td class="phabricator-login-details">'.
	$login_stuff.
	'</td>'.
	'</tr>'.
	'</table>'.
	$notification_dropdown.
	$notification_container;
	$footer_chrome =
	'<div class="phabricator-page-foot">'.
	$foot_links.
	'</div>';
	}

	$developer_warning = null;
	if (PhabricatorEnv::getEnvConfig('phabricator.show-error-callout') &&
	DarkConsoleErrorLogPluginAPI::getErrors()) {
	$developer_warning =
	'<div class="aphront-developer-error-callout">'.
	'This page raised PHP errors. Find them in DarkConsole '.
	'or the error log.'.
	'</div>';
	}

	Javelin::initBehavior('device', array('id' => 'base-page'));
	$agent = idx($_SERVER, 'HTTP_USER_AGENT');

	// Try to guess the device resolution based on UA strings to avoid a flash
	// of incorrectly-styled content.
	$device_guess = 'device-desktop';
	if (preg_match('/iPhone\|iPod/', $agent)) {
	$device_guess = 'device-phone';
	} else if (preg_match('/iPad/', $agent)) {
	$device_guess = 'device-tablet';
	}

	$classes = array(
	'phabricator-standard-page',
	$admin_class,
	$device_guess,
	);
	$classes = implode(' ', $classes);

	return
	($console ? '<darkconsole />' : null).
	$developer_warning.
	phutil_render_tag(
	'div',
	array(
	'id' => 'base-page',
	'class' => $classes,
	),
	$header_chrome.
	$this->bodyContent.
	'<div style="clear: both;"></div>').
	$footer_chrome;
	}

	protected function getTail() {
	$response = CelerityAPI::getStaticResourceResponse();
	return
	$response->renderResourcesOfType('js').
	$response->renderHTMLFooter();
	}

	protected function getBodyClasses() {
	$classes = array();

	if (!$this->getShowChrome()) {
	$classes[] = 'phabricator-chromeless-page';
	}

	return implode(' ', $classes);
	}

	private function getConsole() {
	if ($this->disableConsole) {
	return null;
	}
	return $this->getRequest()->getApplicationConfiguration()->getConsole();
	}
	}
	diff --git a/webroot/rsrc/css/application/base/standard-page-view.css b/webroot/rsrc/css/application/base/standard-page-view.css
	index 2861d69357..619f884f88 100644
	--- a/webroot/rsrc/css/application/base/standard-page-view.css
	+++ b/webroot/rsrc/css/application/base/standard-page-view.css
	@@ -1,324 +1,306 @@
	/**
	* @provides phabricator-standard-page-view
	*/


	.phabricator-standard-page {
	background: #ffffff;
	}

	.phabricator-chromeless-page .phabricator-standard-page {
	background: transparent;
	border-width: 0px;

	-webkit-box-shadow: none;
	-mox-box-shadow: none;
	box-shadow: none;
	}

	.phabricator-standard-header {
	background: #005588;
	color: white;
	overflow: hidden;
	position: relative;
	width: 100%;
	}

	.phabricator-standard-header td {
	vertical-align: bottom;
	padding: 0;
	margin: 0;
	}

	.phabricator-primary-navigation {
	padding-top: 24px;
	padding-left: 24px;
	}

	.phabricator-standard-header a {
	color: white;
	}

	.phabricator-primary-navigation th,
	.phabricator-primary-navigation td {
	vertical-align: bottom;
	font-size: 13px;
	border-bottom: 6px solid transparent;
	padding-top: 14px;
	padding-bottom: 4px;
	white-space: nowrap;
	}

	.phabricator-logo {
	width: 220px;
	}

	-.phabricator-logo-with-custom {
	- width: 440px;
	-}
	-
	.phabricator-logo a {
	display: block;
	width: 220px;
	height: 40px;
	padding: 0;
	margin: 0;
	}

	-.phabricator-logo a.logo-custom {
	- position: absolute;
	- background: url(/rsrc/image/custom/custom.png) no-repeat 0 0;
	-}

	.phabricator-logo a.logo-standard {
	background: url(/rsrc/image/phabricator_logo.png) no-repeat -220px 0;
	}

	.phabricator-admin-page-view .phabricator-logo a.logo-standard {
	background-image: url(/rsrc/image/phabricator_logo_admin.png);
	}

	-.phabricator-logo-with-custom a.logo-standard {
	- padding-left: 220px;
	- background-position: 0 0;
	-}
	-
	.phabricator-logo a.logo-standard:hover {
	background-position: -220px -40px;
	}

	-.phabricator-logo a.logo-custom:hover,
	-.phabricator-logo-with-custom a.logo-standard:hover {
	- background-position: 0 -40px;
	-}
	-
	.phabricator-primary-navigation td {
	padding-left: 10px;
	padding-right: 10px;
	}

	.phabricator-primary-navigation td.phabricator-selected-tab {
	border-bottom-color: #ffffff;
	background: #336699;
	}


	.phabricator-standard-header .phabricator-head-appname {
	padding: 0 1em;
	text-transform: uppercase;
	}

	td.phabricator-login-details {
	text-align: right;
	vertical-align: middle;
	padding: 0px 24px;
	font-size: 12px;
	white-space: nowrap;
	}


	.phabricator-page-foot {
	text-align: right;
	margin: 2em;
	border-top: 1px solid #afafaf;
	padding: .5em 1em;
	font-size: 11px;
	color: #666666;
	}

	.phabricator-admin-page-view .phabricator-standard-header {
	background: #aa0000;
	}

	.phabricator-admin-page-view td.phabricator-selected-tab {
	background: #cc3333;
	}

	.keyboard-shortcut-help td,
	.keyboard-shortcut-help th {
	padding: 8px;
	vertical-align: middle;
	}

	.keyboard-shortcut-help th {
	white-space: nowrap;
	color: #666666;
	}

	.keyboard-shortcut-help kbd {
	background: #222222;
	padding: 6px;
	color: #ffffff;
	font-weight: bold;
	border: 1px solid #555555;
	}

	.keyboard-focus-focus-reticle {
	z-index: 1;
	background: #ffffd3;
	position: absolute;
	border: 1px solid #999900;
	}

	.keyboard-shortcuts-available {
	height: 16px;
	vertical-align: middle;
	color: #666666;
	text-align: right;
	padding-right: 24px;
	font-size: 11px;
	background:
	url('/rsrc/image/icon/fatcow/key_question.png') right center no-repeat;
	}

	.workflow-header {
	background: #efefef;
	padding: 6px 2em;
	text-align: right;
	margin-bottom: 6px;
	border-bottom: 1px solid #dfdfdf;
	}

	.workflow-header button {
	float: right;
	}

	.handle-status-closed {
	text-decoration: line-through;
	}

	a.handle-disabled,
	a.handle-status-away,
	a.handle-status-sporadic {
	padding-left: 12px;
	background-repeat: no-repeat;
	background-position: -4px center;
	}

	a.handle-status-away {
	background-image: url(/rsrc/image/icon/fatcow/bullet_red.png);
	}

	a.handle-status-sporadic {
	background-image: url(/rsrc/image/icon/fatcow/bullet_orange.png);
	}

	a.handle-disabled {
	background-image: url(/rsrc/image/icon/fatcow/bullet_black.png);
	}

	.aphront-developer-error-callout {
	padding: 2em;
	background: #aa0000;
	color: white;
	text-align: center;
	font-size: 11px;
	font-family: "Verdana";
	}

	.buoyant {
	position: fixed;
	top: 0px;
	left: 0px;
	z-index: 8;

	padding: 6px;
	color: #dddddd;
	font-size: 11px;
	opacity: 0.90;
	width: 100%;

	background: #222222;
	border-bottom: 1px solid #dfdfdf;
	cursor: pointer;

	}

	.phabricator-icon-menu {
	height: 40px;
	width: 60px;
	left: -22px;
	position: relative;
	cursor: pointer;
	}

	.phabricator-icon-menu-cell {
	width: 60px;
	}

	.phabricator-admin-page-view .icon-menu-notifications {
	background: url(/rsrc/image/notification_menu_admin.png);
	}

	.icon-menu-notifications {
	background: url(/rsrc/image/notification_menu.png);
	}

	.phabricator-icon-menu:hover {
	background-position: 0 -40px;
	}

	.phabricator-notification-indicator {
	display: none;
	}

	.phabricator-notification-indicator-unread {
	display: block;

	position: absolute;
	right: 8px;
	top: 2px;
	padding: 1px 3px;

	background: #dd3333;

	border: 1px solid #aa0000;
	font-size: 11px;

	box-shadow: 0px 0px 4px rgba(255, 255, 255, 0.75);
	}


	#phabricator-notification-dropdown {
	position: absolute;
	top: 40px;

	border: 1px solid #99c4d7;
	border-top-width: 0;
	background: #fdfdff;

	width: 360px;
	box-shadow: 0px 1px 3px rgba(0, 0, 0, 0.25);

	font-size: 11px;

	z-index: 3;

	word-wrap: break-word;
	overflow-y: auto;
	}

	.phabricator-notification {
	padding: 6px 6px;
	margin: 1px 0;
	}

	.no-notifications {
	color: #999999;
	}

	.phabricator-notification-list {
	font-size: 11px;
	}

	.phabricator-notification-list .phabricator-notification-unread,
	#phabricator-notification-dropdown .phabricator-notification-unread {
	background: #aacfef;
	}

	.view-all-notifications {
	text-align: center;
	font-weight: bold;
	background: #eeeeee;
	border-top: 1px solid #dddddd;
	}
	diff --git a/webroot/rsrc/image/custom/README b/webroot/rsrc/image/custom/README
	deleted file mode 100644
	index dbe339a3b7..0000000000
	--- a/webroot/rsrc/image/custom/README
	+++ /dev/null
	@@ -1,3 +0,0 @@
	-To customize your Phabricator install's appearance, create a 220x80 PNG like
	-the examples in this folder, name it "custom.png" in this folder, and then set
	-'phabricator.custom.logo' to a link URI.
	diff --git a/webroot/rsrc/image/custom/example_facebook.png b/webroot/rsrc/image/custom/example_facebook.png
	deleted file mode 100644
	index 02bd95ec9b..0000000000
	Binary files a/webroot/rsrc/image/custom/example_facebook.png and /dev/null differ
	diff --git a/webroot/rsrc/image/custom/example_rainbow.png b/webroot/rsrc/image/custom/example_rainbow.png
	deleted file mode 100644
	index 1cd8ab464d..0000000000
	Binary files a/webroot/rsrc/image/custom/example_rainbow.png and /dev/null differ
	diff --git a/webroot/rsrc/image/custom/example_template.png b/webroot/rsrc/image/custom/example_template.png
	deleted file mode 100644
	index 0b29e3ada9..0000000000
	Binary files a/webroot/rsrc/image/custom/example_template.png and /dev/null differ

File Metadata

Mime Type: text/x-diff
Expires: Mon, Mar 24, 08:48 (3 w, 3 d ago)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 1259481
Default Alt Text: (82 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions